How to maintain the shirt after sewing for the driver

The maintenance of the shirt sewing after re-driver is the key to ensure its long-term stable operation and efficient production. Here are some specific maintenance measures:

I. Daily cleaning
Body cleaning: Use soft brushes and vacuum cleaners to clean the sewing machine's body, thread wheels, thread bar and other parts regularly to remove dust and fine fibers and prevent them from accumulating inside the machine and causing malfunctions.

Shuttle bed cleaning: The shuttle bed is the core component of the sewing machine's work and is also prone to malfunction. The bobbin should be removed, disassembled and thoroughly cleaned according to the steps in the manual, and then reinstalled with a small amount of sewing machine oil.

Cleaning of fabric feeder: Remove the screws between the needle plate and the fabric feeder, remove fabric hair and dust, and add a small amount of sewing machine oil.

Maintenance of parts
Needle replacement: The needle is the core part of the sewing machine. If the needle is damaged or dull, it will affect the sewing effect and may scratch the fabric. Therefore, needles should be replaced regularly and care should be taken to choose the right type of needle to suit different kinds of fabrics.

Maintenance of the bobbin: Check the bobbin for any foreign matter entering the bobbin and clean it off. Regularly drop a little oil on the bobbin to keep it smooth. Also, the bobbin wheel needs to be cleaned regularly to prevent accumulation of dust and dirt.

Thread bar replacement: The thread bar is one of the most important parts of your sewing machine and has a service life of about one year. After a long time of use, you need to replace the thread bar with a new one to ensure the sewing effect and the lifespan of the sewing machine.

Electrical and air source maintenance
Stable power supply: Keep the power supply stable, connect the sewing machine to an independent power outlet to avoid voltage fluctuations of other household appliances affecting the normal use of the sewing machine.

Gas source check: Check whether the pressure of the air pressure gauge meets the requirements of machine use, and ensure the gas supply is stable.

Operation and Inspection
Operation specification: The operator should be familiar with the operation methods and precautions of the equipment, and operate according to the specification to avoid damage to the equipment or safety accidents caused by misoperation.

Regular inspection: Regularly check whether the various parts of the equipment are intact, such as presser sponge, machine needle, sewing thread, etc., to ensure that the equipment is in good working condition.

V. Other Maintenance Measures
Use of dust cover: When the sewing machine is not in use, it should be covered with a dust cover to prevent dust and chips from intruding.

Lubrication and maintenance: Regular lubrication and maintenance of the moving parts of the equipment, such as presser foot lever, needle bar and other joints refueling, to maintain the smooth operation of the equipment.

Troubleshooting: When equipment malfunctions or abnormal sound, vibration, etc., you should immediately cut off the power supply and find the cause of the malfunction. According to the severity of the problem choose to repair or contact professional and technical personnel for maintenance.

To summarize, the maintenance of the shirt sewing machine needs to start from the daily cleaning, parts maintenance, electrical and gas source maintenance, operation and inspection, as well as other maintenance measures and other aspects, in order to ensure the long-term stable operation of the equipment and efficient production.