How to use the automatic nail button machine

The use of automatic nail button machine steps are relatively complex but organized, the following is a detailed operation process:

First, the preparation work before operation

Check the state of the equipment: to ensure that the head of the automatic nail button machine is in a state of stop, to avoid accidents in the start-up process.

Check the consumables and accessories: check whether the machine needle has been installed, whether the nail button is sufficient and qualified quality. At the same time, make sure that the sewing thread has been threaded correctly to ensure that the sewing process runs smoothly.

Clean up the work area: Clean up any debris on the machine table to ensure that no debris will impede the operation of the machine during operation.

Check air pressure and power supply: Check the air pressure gauge pressure so that it meets the requirements for machine use. At the same time, make sure that the power supply and air source of the machine have been connected and are in normal condition.

Check the condition of fabric pieces: Check whether the fabric pieces on the receiving board have been emptied to prepare for the new sewing task.

II. Operation Process

Power on and reset:
Rotate the power switch to ON position, the machine is energized and powered on.
According to the machine head model (such as Heavy Duty, Brother, etc.), press the reset button on the machine head operation screen to complete the relevant reset action.

Program selection and parameter setting:
Select Chinese or English operation interface on the touch screen.
Enter the monitoring interface to view the current sewing model number and the related size modification column.
If you need to change the style, click the plus or minus symbols in the screen to select; if you need to modify the parameters of the model, you can enter the “Recipe Setting” interface to make adjustments and save the modifications.

Arrange the fabric:
Spread the fabric flat on the discharge plate, with the shoulder facing left.
Align the neckline with the limiting edge of the evening position, and sew the button side close to the fabric piece backing.

Activate the air suction and automatic sewing:
Press your knee against the knee rest switch panel and keep it in place. At this time, the panel air suction is turned on and the fabric is adsorbed.
Adjust the position of the fabric to the optimum condition without any wrinkles or distortions and release the knee switch.
The program executes automatic sewing, during which it is necessary to monitor the machine's operating status and sewing quality.

The automatic take-up and cycle is repeated:
After sewing is completed, the rewinding and clamping device is returned and the fabric can be repositioned for the next round of sewing.

Special operations and troubleshooting
Button mending operation: When the button at a certain position on the fabric piece is not pinned or the effect of pinning the button is not good, it is necessary to mend the button. Manually feed the fabric piece under the needle, align the position of the button, and select the “button” function on the touch screen.

Thread breakage: If the thread breaks during the sewing process, the machine will stop automatically. At this time, you need to thread the machine and select the appropriate operation mode according to whether you need to continue sewing this piece of fabric or not.

Maintenance: Regularly clean the surface and interior of the machine, especially the buttonholing mold to prevent clogging and rusting. Add lubricant in time to keep the machine running smoothly.

Troubleshooting: If the equipment malfunctions or abnormal sound, vibration, etc., you should immediately cut off the power supply and find out the cause of the malfunction. According to the severity of the problem choose to repair or contact professional and technical personnel for maintenance.

Fourth, shutdown operation
After the operation, rotate the power switch to OFF position to turn off the equipment power and cut off the gas source.

In summary, the use of automatic buttonholing machine needs to follow certain operating procedures and precautions to ensure the normal operation of the equipment and sewing quality. In the process of using the machine should always monitor the status of the machine and deal with abnormalities in a timely manner to ensure the stability of production efficiency and product quality.